|
Maximum cut off stock
|
|
|
Cutting at angle 90 °
|
in
|
16.54"
|
|
16.54"
|
|
17.32"× 16.53"
|
|
Bundle clamping capacity max.
|
in
|
17.322834646"× 6.6929133858"
|
|
Material support height
|
in
|
31.49"
|
|
Stock feeding:
|
|
|
|
single
|
In
|
19.68"
|
|
repeatedly
|
in
|
393.66"
|
|
Shortest length of residual piece in automatic mode
|
in
|
2.76"
|
|
Sawband speed
|
m/min
|
15-120
|
|
Sawband dimmensions
|
mm
|
4770x41x1,3
|
|
Drive power:
|
|
|
|
Saw motor
|
hp
|
74.779188952
|
|
Coolant pump
|
hp
|
13.596216173
|
|
Hydraulic motor
|
hp
|
82.936918656
|
|
Chip brush
|
hp
|
x
|
|
material feed
|
hp
|
|
|
Overall dimensions:
|
|
|
|
length
|
ft
|
9ft 0.66
|
|
width
|
ft
|
7ft 10.48
|
|
height
|
ft
|
4ft 10.66
|
|
Net weight
|
lb
|
5952lb
|
Description
The model OL 420 A is a hydraulically operated high efficiency bandsaw cutting machine conventionally controlled and it is designed for straight cutting. The machine OL 420 A is a swing frame type machine and it is for industrial usage.
The bandsaw cutting machine OL 420 A is designed for profitable cutting of solids, pipes and profiles of ferrous and non-ferrous metals. This model allows cutting of tool steels, titanium and stainless steels of all types.
The control of the model OL 420 A is based on an industrial controller having capability for setting of the number of the cutting stocks.
The model OL 420 A is designed for application of the last generation bimetal and carbide tips cutting blades.
The machine OL 420 A belongs to the category of automatically operated machines, equipped with a hydraulic system, allowing automation of many working operations such as feeing and clamping of the material, saw bow movement up and down, getting away of the cut bars and a cutting force control. This machine is equipped with a system for automatic tracking of the cutting speed and the cutting force. In case of the cutting force increasing the saw bow reduces automatically the feeding speed to its aning and after that smoothly this speed increases to reaching the previously set value of the saw blade cutting force.
The model OL 420 A assures maximum productivity via increasing the range of material usage and the minimum remnant of 70 mm at the automatic cutting mode.
Saw bow feeding – hydraulically;
Saw bow lifting after cutting – hydraulically;
Material feeding – hydraulically;
Material clamping – hydraulically;
Saw blade tensioning – manually;
Cutting length setting – automatically;
Movable bandsaw guide adjustment – manually;
Higher accuracy and wearing out resistance
Higher productivity and reliability
Suitable for working in conditions of deserted technology
