|
Maximum cut off stock
|
|
|
Cutting at angle 90 °
|
in
|
12.99"
|
|
12.99"
|
|
19.68"×12.99"
|
|
Cutting at angle 45 °
|
in
|
12.99"
|
|
12.99"
|
|
14.17"×12.99"
|
|
Cutting at angle 30°
|
in
|
8.46"
|
|
8.46"
|
|
8.46"×12.99"
|
|
Material support height
|
in
|
27.55"
|
|
Shortest length of residual piece in automatic mode
|
in
|
7.28"
|
|
Saw band speed
|
m/min
|
15-100
|
|
Saw band dimensions
|
in
|
4700x34x1,1
|
|
Stock feeding:
|
|
|
|
single
|
in
|
33.46"
|
|
repeatedly
|
in
|
9999.9
|
|
Drive power:
|
|
|
|
Saw motor
|
hp
|
5.44
|
|
Coolant pump
|
hp
|
13.59
|
|
Hydraulic motor
|
hp
|
82.94
|
|
feed motor
|
hp
|
1.49
|
|
Overall dimensions:
|
|
|
|
length
|
lb
|
5952lb
|
Description
The model OL 330/500G AP nc is a high efficiency automatically operated bandsaw cutting machine with parallel saw bow guiding for industrial usage and ultimate application of cutting of solids, pipes and profiles of ferrous and non-ferrous metals.
The model OL 330/500G AP nc is based on industrial programmable controller. It has possibility for making up to 99 programs containing number of parts and length of cutting. The main features of the control are the simplicity, understandable and easy to learn. It has the opportunity for minimizing of mistakes and allows frequently changes of the serving personnel. The connection between the operator and the machine is performed by a 5.7” touch screen. The communication is entirely on Bulgarian or English language.
The construction of OL 330/500G AP nc allows precisely infinitely variable adjustment of the cutting angle with automatically fixing and visualization by a digital read-out screen, accuracy of 0,1º.
The cutting speed is assured by an asynchrony electric motor and it is frequency controlled at the range of 15 ÷ 100 m/min.
The cutting process performs automatically without operator’s involvement. The saw bow runs downwards via gravitational way and the feeding speed is controlled by a hydraulic cylinder and a valve.
The machine OL 330/500G AP nc belongs to the category of fully-automatic machines equipped with a hydraulic system, allowing automation of many working operations (material clamping in the vice, saw bow movement up and down), and a cutting force control. The machine is equipped with a system for automatic tracking both of the feeding speed and the cutting force. At the cutting feed extremely increasing the saw bow slows automatically to its full stop and smoothly increasing up to the set value after the cutting force is normalized..
The model OL 330/500G AP nc has an integrated precisely playless guiding of the movable clamping device by prismatic linear bearings..
Saw bow feeding – hydraulically;
Saw bow lifting – hydraulically;
Material feeding – by a ball screw couple;
Material clamping – hydraulically;
Saw blade tensioning – manually;
Saw bow fixing – hydraulically;
Movable band guide adjustment – manually
